Find 2L Oxygen Medical Cylinder, 5L Oxygen Medical Cylinder, Aluminium Alloy Steel Cylinder on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Medical Oxygen Gas Cylinder > Medical Oxygen Intake Device for Medical Supply

Medical Oxygen Intake Device for Medical Supply

Basic Info

Model No.:  DSW 905B905B, 906B

Product Description

Model NO.: DSW 905B905B, 906B Wet The Cup: 200ml Applicable Gas: Oxygen Output Pressure: 0.2-0.3MPa N.W: 10kg Trademark: DSW Origin: China Structure: Spring-Piston Humidity Conditioning: 200ml Input Pressure: 15MPa G.W: 11.5kg Material: Brass Specification: CE, ISO HS Code: 9019200000
Type Brand Name Model Number Place of Origin  Applicable Gas Input Pressure Output Pressure Safety valve The Range of Flow
Breathing Apparatus  DSW DSW 905B905B,906B DSW China Oxygen    15MPa 0.2-0.3MPa   0.35±0.05MPa  1-15L/min
Connection Thread  Structure Wet the cup Humidity Conditioning Packaging Details  Dimension G.W N.W Material
G5/8,CGA540  Spring-piston 200ML  200ML 10PCS/CTN  53*44*18cm  11.5Kg 10Kg   brass


Medical Oxygen Intake Device For Medical Supply 
 

Outside thread G5/8,
Flow 0-10L/min or 0-15L/min
Output pressure 0.2-0.3MPa,
Input pressure 150bar
 
gas inlet types: 
1.gas -specific  inlet  probe conforming to BS ,AMERICAN, GERMAN, FRENCH 
2.1/8'' NPT female-threadde inlet 
3.Bullnose nipple with 3/8'' BSPNUT.   Other country-specific direct and remote-fitting configurations are 
available- contact the office. 
gas outlet types: 
1.body has female thread -use BMI 'universal'tubing nipple 
2.body has a 9/16'' UNFmale thread -use tubing nipple(oxygen) 
mounting: 
1.direct-probe fits into wall-mounted gas -specific socket(antirotation device maintains flowmeter upright) 
2.remote-kit available with 2m colour-coded flexible hose,and a gas-specific connector the flowmeter is mounted 
remotely from  the gas source on: 
a)wall/machine-mouted V-plate 
b)medical rail. 
NOTE:the rail-mounting kit utilises a "universal' rail clamp,allowing attachment to BMI,ohmeda,vickers"modura",
din rail section. 
operation and use 
2.service & maintence 
do dot disassemble when connected to a source of pressure 
caution 
repairs must only be undertaken by suitably trained personnel. 
the pre-use checks in section 2, and the leakage check in section 3.2 must be carried out after any disassembly 
3.tube assembly 
outer tube 
if the cover tube is cracked, withdraw the unit from service and renew: 
1.disconnect the flowmeter from the pressure source 
2.open the flow control valve to relieve any contained pressure. 
3.hold the unit vertically (to retain the flow tube and ball )unscrew the cover tube and lift off. 
calibrated tube and indicator ball 
4.lift off the flow tube , taking care not to let the ball roll out 
5.remove the tube connector adaptor and the cover tube o-ring 
6.fit a new cover tube o-ring at the base of the body. 
7.fit a new tube adaptor. Check orientation,as illustrated. 
8.fit the flow tube , and ball over the adaptor. 
9.position the tube with the scale towards the front of the unit. 
10.fit the outer tube,and screw clockwise into the flowmeter body. 
4. environmental conditions 
store/operate between 5 and 25 degree 
protect exposed o-rings from light 

Contact us if you need more details on Oxygen Regulator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Oxygen Inhaler、Inhaler. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Medical Oxygen Gas Cylinder

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters